ID: 24661 (CHARGER05)
Hover or touch above to zoom
Please note: This Charger is for NiCd / NiMh type battery packs. NOT
for Li-Polymer, Li-Mn, Li-Ion type battery packs.Airsoft Smart Charger for 7.2V-12V NiMh & NiCd Battery Packs - Advanced Type
A smart charger is highly recommended for anyone still using a wall charger! A wall charger requires 4~5 hours of monitoring and you will never really know if a battery pack is fully charged, or over-charged. This smart charger will peak the battery charge, stop charging when full and provides a green/red led light indications so you never have to do any guess work. Discard that wall charger you received free with a Chinese AEG and never look back!
Highly recommended to have one if you are serious in advancing yourself in Airsoft!!Features:Smart Charger for NiMh RC and Airsoft battery packs 7.2V ~ 12V (6~10 cells)Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)Fast charger with current switch to select either, 1A and 2A. Delivers full charge within 1 - 2 hours.Charging Current 0.9A for battery packs with capacity from 1100mAh-2200mAh. For 2000 mAh pack, charging time is 1 hour.Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours. Smart Charger with automatic voltage detection.Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.Red LED will be on during charging.Automatically charging ending with negative delta V.Worldwide usage with 120-240V ACSafety protection fuse for over current, short circuit & reverse polarity protection. Manufacture:
Smart Charger Specification
- 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
- 1 connector adapter from standard Male Tamiya to Mini Female.
- 1 set of clip adapter with Male Tamiya connector on one end.
- Additional fuses
- FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
- Input: AC100 - 240V
- Output: 6-12V 1A or 2A
- Connect battery pack to output connector and plug AC power source.
- Make sure battery polarity is connected correctly (Red wire is positive)
- Charger will detect battery voltage automatically, Red LED will be on during charging
- When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
- Battery will be charged at 0.9A or 1.8A constant current,
- Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
- The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
- Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than 1100mAh.
- Battery pack must be made by high drain current cell.
- Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.
- The charger is designed for indoor use only. Do not leave the charger unattended during charging.
- The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
- Don't cover the charger when charging, ambient temperature shall not be more than 40oC
- Do not leave batteries charging on flammable surfaces, wood surface or carpet.
- Cut off the power supply before connect or disconnect the charger with batteries.
- Don't try to disassemble the charger, High voltage inside, danger!
(Write a review)
"first smart charger I've ever bought, and was blown away at how amazing this is! Comes with multiple adapters for many battery types, charges very fast (compared to standard wall chargers) I love this, and is probably the only charger I will ever need for the forseeabel future!
"Does the job well, charges my 8.4 and 9.6 batteries in under an hour and a half each after like 6 hours of usage. Nice product.
"This has worked flawless though I didnt purchase it directly from evike i assume the person that sold it to me off ebay got it from here, but thats not the case this does what its made. charges diffrent type of voltage battery. Really reccomended.
Discuss about Airsoft Smart Charger for 7.2V-12V NiMh & NiCd Battery Packs by Tenergy - Advanced Type with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!