Matrix Steel CNC Airsoft AEG Gear Set (Super High Torque) / 32:1

$28.00 $25.00

This item is currently Out of Stock

Usually restocked within 1-3 weeks. Add to your wishlist to stay posted!

Model: Gears-MTX-SUTQ
Location: S7-114 SO-187
x

3 Customer Reviews

by Steven D. on 04/27/2014
"This is the best gear set ive used to date. I have these in a fully custom V3 cyma gearbox with guarder gearbox spring set, steel ball bearing spring guide, m150 spring, bore up kit, JBU aluminium half tooth piston, APS low resistance wire set, MATRIX magnum 3000 high torque motor, 11.1v 1450 mAh lipo, and no selector switch. my set up pushes the limits of an aeg. i havent run it through a chrono test yet, but at 50 yds w/ .25's it can shatter beer bottles with ease. the gear set beats every other set ive used in the past! and with the m150, 32:1 gears, HT motor, and 11.1 im getting about 14 rps! Which at roughly 650+ fps is insanity. If you have these in a high fps set up and want a higher ROF, i'd recommend the lonex "TITAN" A1 high torque/ speed. it'll give you an insane boost!
by Al A. on 05/23/2013
"I have grow to love these Matrix CNC gearset over the prometheus that kept me going for the last few years. They are strong and each set lasts me over 15 months on average. I have a decked out 500 FPS Marui M4-A1 and these worked great!

can't ask for more, great pricing and stronger than anything else I tried out there.
by Dwight E S. on 11/27/2011
"I bought a set of these for the ICS Full Metal Tactical M4A1 (M4 and M4A1 are two different things) that I bought a while back (by the way it is an amazing out-of-the-box performer) and recently tried installing them with the help of someone trustworthy and responsible only to find that the sector gear is .01 (one hundredth) of an inch larger in diameter than the gear that the gun had in it and will simply not fit the two part ICS gearbox as it is just too tall. Other than that they were fine. I have no clue how well they will work in a standard one piece gearbox but I imagine they would fit as that is what they were originally designed for.
Matrix Steel CNC Airsoft AEG Gear Set (Super High Torque) / 32:1

Gear Set Type: Super High Torque.
Gear Ratio: 32:1
Spring: Recommended M170 and Under.
Battery: Recommended 12V and Under.
For: V.2, V.3, and all gearboxes that use standard type AEG Gears. (M4, AK, MP5, G36, P90 and other compatible AEG models.)
Material: Steel.
Production Type: CNC Machining.
Manufacturer: Matrix Tactical Systems / Hong Kong

Disclaimer: The Super High Torque Gear Set requires the use of a half-tooth piston

Half tooth pistons can be found here at Evike.com


Features:
Reinforced Gear Set.
Low Noise.
Great Cycle Continuity.
CNC Steel Processing.

Set Includes: Reinforced CNC Steel Gear Set.
  1 x Sector Gear
  1 x Spur Gear
  1 x Bevel Gear

Airsoft AEG Gears 101
- Matrix Super High Speed: 13:1 Gear Ratio. ~10 RPS over Normal Torque.
  Suitable for springs M110 and under.
- Matrix High Speed: 16:1 Gear Ratio. ~5 RPS over Normal Torque.
  Suitable for springs M120 and under.
- Matrix Normal Torque: 18:1 Gear Ratio. Standard AEG Gear Set.
  Suitable for springs M135 and under.
- Matrix High Torque: 100:300 Quiet Gear Ratio. Pulls up to M160 Spring.
  Suitable for springs M150 and under.
- Matrix Super High Torque: 32:1 Gear Ratio. The highest torque gear set we offer. Pulls up to M200 springs.

Selecting Your AEG Gears:
Torque: Force to rotate.
Just like your car and other applications in life, Airsoft AEG gears follows the same physics behind it all.
Gear sets increase it's "torque" output by increasing the number of teeth. Which results a longer rotation and higher torque.
Keep in mind, generally you increase torque of your gearbox to enable pull of stronger springs and lower the amount of work on your motor and battery.

Facts:
- Stronger Torque pulls stronger springs.
- Stronger spring slows down rate of fire.
- Strong battery increases rate of fire.
- High Performance = High Rate of wear and tear.
This product was added to our catalog on Monday 21 June, 2010.

This item is currently Out of Stock. Most out of stock items are restocked within 1-3 weeks. Some items may take longer. Please add this item to your wishlist to keep posted on its availability.

Wanna chat about Matrix Steel CNC Airsoft AEG Gear Set (Super High Torque) / 32:1?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

Items on Sale