ID: 33819 (BAT-MTX086)
Hover or touch above to zoom
Matrix has done it again! This 2300mah is probably the best crane stock battery you can get if you want to stay NiMh instead of going lipo and you have a standard type crane stock. (If you have the Sub C fat type crane stock by Classic Army, you may be able to use the 3000mah, but this one will still fit and fit much easier!).
Dimensions: Diameter: 14mm Length: 150mm / 100mm (2 long sticks / Single short stick).
Type / Plug Type: Small Type. Small Type Tamiya
Cell Size: AA
Cell Number: 8
Common FAQ / Battery 101:
- NiMh battery does NOT require discharging. At any battery level, you can just charge it up to full.
- The "Crane" configuration is perfect for crane stocks widely used by different manufacturers.
- If your application has a "large tamiya plug" all you need is an adapter.
- Amp = Capacity. The higher the Amp the longer you can use it before recharging. Voltage = Power. The higher the voltage, the faster your motor turns, and the more power your motor will have.
Charging 101: Charging time with a standard wall charger, when the battery is complete empty is ~6 hours. Smart charger recommended (A smart charger can charge NiMh batteries at any time and stop charging when the battery is full. Always monitor battery charging and charge batteries on a non-flammable surface.)
Matrix batteries are high drain application battery that gives you even better output than Sanyo and other leading brand batteries.
(Write a review)
"This is a very powerful and long lasting battery! The wires are a bit long which can make it difficult to put in a stock. I have to extend my crane stock about 4/6 to have the battery fit inside. Overall would recommend for the price!
"works well and does the job holds a charge a long time. More wire than necessary but I see that as a plus since I convert all my plugs to Deans and it is better to have more wire than too little! Also fits perfectly inside my Krytac crb, if you have a Krytac this is best battery I have found that is not LiPo.
"In short: great battery. I does fit inside a crane stock, but because of the extra wiring and stuff, you'll only be able to adjust it about halfway down. Since I play with mine at the second to last extension, it doesn't bother me at all. It also might take you a couple of minutes to figure out HOW to get it all to fit, but it
An easy way to get this in is to fully collapse (push in) your stock and plug it in. Fit the two large sticks where they need to go, tangling the wiring as little as possible, and then fully extend your stock. Then simply place one side of the cap/lid/whatever in first, and push in whatever wires stick out as you lower it in. Once you get it, it's very snug.
PROS (Because I love Pros/Cons in reviews):
- Solid 9.6V battery.
- Much higher than average capacity. Great for all-day events.
- It's black. So edgy.
- Lots of wiring, due to the third stick, which can bit a little difficult to make fit. This is an extremely minor annoyance, though, and only until you get used to loading it up.
I'd highly recommend it!
Discuss about Matrix 9.6V 2300mAh NiMh high output Airsoft RC battery (Crane Stock Type.) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!