Angel Custom G2 6.01mm Inner Barrel Series are the pinnacle of quality and performance in the Airsoft Industry. Utilizing advanced machining technology with premium grade materials, these inner barrels stand out in both quality and performance.
After considerable testing and R&D, SUS304 stainless steel was chosen for its qualities that it gives to the application of barrel manufacturing. Despite its higher cost and manufacturing complexity, SUS304 stainless steel provides a degree of hardness, durability, and resilience to ensure the barrel retains its consistency and accuracy even after tens of thousands of rounds. Other qualities of SUS304 stainless steel is that it has natural scuff, corrosion, and weather resistant qualities making it easier to maintain for years of reliability. Each barrel is crafted using precision machinery; a high polish and precision crowning provide peak performance.Compatibility / To Determining the inner barrel length you need:
All Tokyo Marui VSR-10 Series / WELL MB-03 / MB-07 / MB-09 / MB-10 / M700, HFC VSR-11 Series, JG BAR-10, G-Spec series Airsoft sniper rifles and compatible models.
To determine the length you need, measure from where the magazine feed the bb to the tip of your inner barrel, or where you want your inner barrel to end. Subtract ~5mm for hopup unit. Remember, it is perfectly okay to have an inner barrel shorter than your outer barrel, or have the exposed sections hidden in a longer flashhider or mock silencer.
To determine the length you need, measure from where the magazine feed the bb to the tip of your inner barrel, or where you want your inner barrel to end. Subtract ~5mm for hopup unit. Remember, it is perfectly okay to have an inner barrel shorter than your outer barrel, or have the exposed sections hidden in a longer flashhider or mock silencer.Why Angel Custom? SUS304 stainless steel barrels are simply better than alloy, aluminum, and brass barrelsAngel Custom Tight bore barrels are the most affordable steel 6.01mm tight bore barrelsAngel Custom's manufacturing capability provides industry leading accuracy and precisionWhy 6.01mm?
With the 5.99mm and 5.98mm bbs going extinct, and with present day match grade bbs being 5.88~5.95 for a better center of mass, 6.01mm became the new optimized bore for maximum range, grouping and accuracy.(BB Diameter Deviation Reference: Tokyo Marui / Excel (5.90+
). KSC/Evike Japanese Spec. (5.88+
). Matrix, WE, AIM Top, Madbull, Elite Force (5.90+
6.01mm barrels also provides less air volume in the barrel, resulting less air needed from the cylinder for each projection.Inner Barrel FAQ:
If you greatly increase the inner barrel of your AEG, you may want to make sure your gearbox Cylinder is adequate. (For example, if you install a 509mm inner barrel on your MP5, you may want to switch the cylinder to a full cylinder so the amount of air inside the cylinder is equivalent to your new barrel.
- Improve grouping / accuracy
- Increase power by 20~50 FPS (varies pending barrel length)
- Increase range / distance (maximum range / effective range varies pending barrel length)
- Milled channels to secure barrel onto the hopup unit
- Angled window for reducing wear on the hopup bucking
- CNC milled and tapered crown
- Individually crowned edges for improved performance
- Crafted from high quality 100% SUS304 stainless steel
- Highest strength & durability amongst all existing Airsoft barrels
- Precision processing and surface polishing.
- Rust / stain / weather resistant
- Minimizes vibration during rapid fire for consistent accuracy and range
High Quality 100% Pure SUS304 Stainless SteelOverall Length:
Tokyo Marui VSR-10 Series / WELL MB-03 / MB-07 / MB-09 / MB-10 / M700 / HFC VSR-11 Series / JG BAR-10 & G-Spec series as well as other similar Airsoft sniper rifles modelsManufacturer:
Available in various lengths.
California residents click here for Proposition 65 warning
(Write a review)
I have placed this barrel in my uber custom VSR ($1500+ build). This barrel is a major factor in the accuracy of my rifle. I am a avid shooter and take my VSR with me to the real steel range to test the accuracy, whenever i have made any modifications, and have the rifle is hitting a 4" wide x 6' tall post at 100 Meters. I am using a custom TDC mod, RHop, Flat Nub and 490FPS (tested with .20s). I am using .40 ASG bb's.
I would purchase this barrel again over the competitors, as it has proven its worth.
"I do not have this barrel but it WILL NOT fit a snow wolf m24. The snow wolf stock barrel is 492 mm long Not 486.
"The first thing to note if you are planning on putting this in your VSR-10, is that they expect you to also buy the Angel Custom hopup for the VSR-10 that allows it to use AEG inner barrels. Yes, this is an AEG inner barrel, you have been warned.
So, not knowing it was an AEG inner barrel, i got it for my VSR-10 and tried installing it. I had to modify the hop up a bit, but i finally got it to work. It felt like the gun was shooting better when I had the barrel installed, but when I went to the range and chronoed, it halved the original FPS. Yes, a 200 FPS decrease.
So 1/5 for VSR-10 install.
However, I installed it into a m4 build and it had great results. I don't have a different barrel to test it against but with an m130 spring and a bore up kit, this gun was shooting over 200 feet.
For AEG, 5/5