<b>WE 190mm Tight Bore Inner Barrel w/ Mock Silencer for HI-CAPA 1911 PX4 Airsoft GBB</b>

» » » »

WE 190mm Tight Bore Inner Barrel w/ Mock Silencer for HI-CAPA 1911 PX4 Airsoft GBB

Model : [MS-WE-190wMS]
Location : [U1-034]

$40.00

*Pistol in image not included

WE 190mm Tight Bore Inner Barrel w/ Mock Silencer for PX4 HI-CAPA 1911 Airsoft GBB
This tight bore barrel kit by WE-Tech will increase the performance of your favorite WE compatible pistol and giving it a new tactical look at the same time! Easy to install! The WE tight bore barrel + mock silencer kit essentially replaces your original inner barrel with an extra long 190 tight bore. Replace your Hi-capa, PX4, or 1911's original inner barrel with this kit, and immediately increase it's accuracy, range, and power by 50+ FPS!

Inner Barrel Length: 190mm
Inner Barrel Bore: 6.03mm
Mock Silencer / Barrel Extension Length: 100mm (not including thread length)
Compatibility: WE, Tokyo Marui, KJW, HFC and other similar HI-CAPA (3.8, 4.3, 5.1), PX4 and 1911 Series Airsoft GBB Pistols with Threaded Outer Barrel

Manufacturer: WE USA

This product was added to our catalog on Monday 26 September, 2011.

Average Rating:
Current Reviews: 6

Submited By: Matt P. on 03/10/2013
PRO'S:
-Does what it's advertised to do. Increases fps by about 30-60 fps and increases accuracy a little bit.
-Looks great. The picture it's advertised looks different from what I got, but still looks fine.
-Light-weight metal construction.
-When you put it on, sounds like a real silencer.
-Great price when purchased with 20% off coupon.

CON'S:
-Doesn't actually silence anything which is fine, mock suppressors can not silence any weapons legally.

DETAILED REVIEW:
Love this thing! Got it for my HK3 PX4 (WE PX4) and it looks great and functions great! The chrome slide I got at Evike for the PX4 however, came with a metal orange tip. I tried unscrewing it with pliers, and the orange tip ripped in half, so I had to get the remaining orange tip in the barrel with a screwdriver which took a bit. This thing looks great and does all the functions it's advertised to so. The HK3 PX4 (WE PX4) shoots at around 290-300 fps, but with this upgrade, shoots at 350 fps, still being legal for indoor play! The accuracy is only slightly increased, not significantly for me anyways. Would definitely recommend this to anyone looking to upgrade their gun. For the price, definitely worth it with the 20% off coupon I used. I absolutely love the sound of putting on the silencer, sounds just like a real one. GET IT!

Submited By: Joe S. on 02/09/2013
This kit is great. I put it in my WE/Socom Gear 1911 MEU and it boosted my fps from ~330 to ~375. Accuracy is phenomenal!

Submited By: David S. on 01/03/2013
I just put this on a "hyper strike" and ran into issues. As it turns out, the front "striker" block interfered with the cycling of the pistol when the can was attached. This usually happens when you're low on gas and it causes the trigger to be disconnected from the sear even though the hammer is fully cocked. I ground off the checkering around the outer barrel so that the outer barrel can move back further in the slide and unlock properly during cycling.

Other than that, the accuracy and balance of the gun has improved with this kit. Looks real nice, too. Just be sure to tighten the can every so often as it will get loose with a lot of use.


CQB Master Custom Full Metal M9 Sword Cutlass Airsoft Gas Blowback Pistol by WE	WE 4.3 Hi-CAPA OPS Special Edition Gas Blowback Pistol - (Black/Stainless)

(This Month's Holy Cow Deal) FREE ($3*) Spare Magazine for each qualifying WE KJW Hi-CAPA 1911 M9 GBB Pistol Purchase	Evike.com Airsoft 6mm BB Speed Loader for All Airsoft Magazines (transparent)	Evike.com Moondog Industries Gas Fill O-Ring for all gas magazines
Madbull Airsoft Propane Adapter with Silicon Oil Port	AIM All Purpose Silicon Lubricant Oil Spray for Airsoft / Firearm	WE Spare Magazine for WE & WE OEM 1911 Airsoft Gas Blowback series (Black / Rubber Pad)