Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)

$48.00 $39.99

Model: AC-VSR-06
Location: S12-009 SO-282
x

3 Customer Reviews

by Oliver H. on 06/13/2014
"This CNC hop-up looks pretty but it is out of spec. When I first installed it no bb's would feed. I discovered that the problem is a piece of aluminium at the end of the bb catch track. On one side this piece defines the lowest position of the bb catch, on the other it depresses a latch on the magazine to allow bb's to feed. Without modification the piece is not low enough to depress the latch on the magazine. This can be fixed by adding a small amount of jb weld. The second problem is that it does not allow the bb catch to slide down to the design position. As a result the bb catch doesn't work and bb's slide into the outer cylinder when the bolt is retracted. Bb's in the outer cylinder prevent the piston from moving forward and prevent the nozzle from coupling with the hop-up correctly: the gun dry fires. You can solve the second problem by grinding down the piece of aluminium with a dremel tool and/or building up the inner ring of the bb catch with jb weld.

All in all it's pretty annoying to have to modify a piece that's supposed to be CNC'd with precision. Angel Custom, can you please be more careful with your machining. For 39.99 I would recommend using the VSR 10 original hop-up chamber. If you were like me and bought the chamber because you thought it would work well and look cool, please see previous paragraph.

PROS:
Looks pretty

CONS:
Doesn't work without modification.... not what you should expect for a precision CNC part.
by Jorge V. on 05/05/2014
"Well this seem like a good hop up chamber specially for the price, I installed it on my tokyo marui vsr 10 g-spec along with a 6.01 430 mm angel customs barrel and now my rifle won't feed bbs. There seems to be some specification variation with the bb wedge release as it will not feed bbs into your gun. Waste of money this was, this should not be advertised for tm vsr10 as it doesn't work.
by Jason C. on 12/11/2012
"A must have if you plan on increasing the inner barrel length of your VSR! I installed mine along with a 590mm 6.01 tightbore, also from Angel Custom, using the hop up rubber it came with, and it can achieve way better groupings than the stock barrel and hop up unit. Also this will allow you to use AEG barrels and hop up rubbers, which come in a greater variety of lengths than the proprietary VSR barrels out there.

Pros:
Much cheaper than PDI version
More versatility when it comes to inner barrels
High quality lightweight metal
Nice red anodized finish

Cons:
None!
Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)
Here at Angel Custom is where second best, is not good enough! The BEST Hopup Chamber money can buy for your VSR-10 Bolt Action Airsoft Sniper Rifle!

*The Angel Custom Ultimate VSR-10 hopup chamber uses an Angel Custom long version bucking that is even longer than an AEG bucking (one included, and spares are available.) The ability to use this longer bucking is the primary feature of this hopup chamber, providing accuracy, range and durability not found in other VSR-10 setup!
The Angel Custom PSS10 VSR-10 Hopup Chamber features the most advanced Airsoft technology combined with machine precision CNC processing. It will provide your VSR-10 a much better precision in shooting, operation stability and best of all, your VSR-10 will be AEG tight bore barrel compatible. (Saving on a hard to find / expensive VSR-10 tight bore with not so great air seal right off the bat!). This Hopup unit also features a 2 point V shape bucking that will provide you a much better accuracy and range. Looking for a high precision, high durability and high performance hopup chamber for your VSR-10 platform bolt action sniper rifle? This is probably the best of the best.

System Includes: VSR-10 CNC Hopup unit, extended hopup rubber with integrated internal V-teeth and key tool.
Compatibility: For VSR10 Airsoft Sniper Rifles
Material: 100% CNC Military Grade Aircraft T6 Hi-Grade Aluminum
Surface finish: Hard Anodized.
Manufacturer: Angel Custom
Application: For Tokyo Marui, JG BAR, JG G-Spec, HFC VSR-11, WELL MB-03, MB-07, MB-10

Angel Custom vs Stock and others?
  • 100% CNC Milling vs Diecast for highest precision.
  • CNC T6 Military Grade Aluminum vs Zinc Alloy cheap metal.
  • Precision long range hopup bucking vs incorrect sized poor quality stock bucking.
  • Precision for performance vs low budget low quality.
  • Best of the best vs "average".

  • Features:
  • Allow our VSR-10 to use standard AEG tight bore barrels with enhanced air seal.
  • 100% CNC Out of Air Craft Grade Aluminum.
  • Hard Anodized Surface Finish.
  • VSR-10 Enhanced Performance Hopup Rubber.
  • Extended hopup rubber with cap ring to adopt AEG inner barrels with tight air seal.
  • Hopup Rubber has integrated v-teeth to ensure center loading.
  • *Original hopup bar & spacer are not included.


    A Angel Custom AC-VSR-06 Elongated "Range Extension" rubber bucking is included in this system. Spare bucking can be purchased individually right here at Evike.com!

    FAQ: Can this chamber use the old type, short bucking?
    A: No, and you won't want to. The chamber was extended to provide you the superb performance traditional hopup chamber cannot provide. The Angel Custom bucking out-performs, lasts longer and is simply the best choice!
    This product was added to our catalog on Tuesday 28 February, 2012.

    Wanna chat about Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft Sniper Rifles (w/ Bucking)?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

    Items on Sale