ID: 41035 (HU-MTX-B80)
Hover or touch above to zoom
Matrix Advanced Silica Airsoft AEG Hopup Buckings (Set of 2) - 80 Degree / 480~630 FPS50 Degree: 250~350 FPS / 0.20g bb
The Matrix Advanced bucking series are among the industry's most recent release packed with all the new designs for an advanced performance! Instead of a economical one-for-all bucking, the Matrix Advanced bucking series are made specifically in various hardness and degrees to best match your AEG's power output. Being one of the most recent release in the market, every Matrix Advanced bucking is engineered with integrated Silica Gel and inner teeth to further guide your shots to achieve power, range and accuracy with the precisely calculated contact surface it provides.
Hopup Bucking 101: Hopup bucking is a rubber tube right between your inner barrel and the hopup system. It is dedicated to control the feeding and back-spinning of your Airsoft bb as it leaves the inner barrel. The higher the velocity, the harder the rubber needs to be. Newer designed hopup bucking like the Matrix Advanced series also provides inner teeth to further guide the bb for a much longer range and accuracy.
Compatibility: For Tokyo Marui, Classic Army, G&G, KWA, JG, Echo1, VFC, Matrix, G&P and other compatible Airsoft AEG Rifle Hopup Units. Also works for GBB rifles and bolt action sniper rifles that uses or is converted to use AEG type buckings.
Bucking Hardness vs FPS Optimization chart
65 Degree: 250~420 FPS / 0.20~0.25g bb
70 Degree: 380~490 FPS / 0.23~0.30g bb
80 Degree: 480~630 FPS / 0.25~0.40g bb
*This chart is intended for reference only. Every rifle is unique and result may vary. Please use Matrix, Evike.com and compatible high grade bbs for best results.
Hardness: 80 / 80 Degree
Suggested Power Output: M120~M170 / 480~630 FPS
Material: Hardened reinforced silica gel.
Installation Instructions: During installation, it is a good idea to apply some light silicon oil on the bucking. Keeping the bucking lubricated will prolong the longevity of the bucking and o-rings involved in any Airsoft equipments.
Applications / Features:
Increase hop up accuracy and consistency.Machine precision construction to ensure superb air seal.Tight bore barrel friendly.Easy installation.Prevents double feeding.Increase FPS (certain conditions may require.)Advanced Inner teeth desugb provides a larger contact surface for enhanced range.Enhances maximum range performance.Made out of Silica Gel for advanced performance over traditional rubber.Comes in set of 2 for the best value!
(Write a review)
"Shaved it down for flat hopping. Easy to cut and I'm getting a really straight stream of plastic with a high tourque / fps aeg setup. Hasn't ripped yet under a full auto 170 spring.
I must say, I am incredibly surprised. This works Incredibly well with .43g and .4g BBs. It gives the most consistent, straight, and an unusually far BB travel I've ever experienced with stock Hop Up and Nubs. Seriously. Impressed. I think I may stick with this over the Flat-Hop, just because it's easier to take care of. Usually my shots have a pretty big spread... this Bucking/Nub just make them all follow the exact same path. It's kind of insane.
Also, info for what I'm currently using - 515 FPS(with .2) JG G36K, DMR, fully modified internals/externals and rewired for DEANS/low res. Lonex hop up. Madbull inner barrel 6.03.
If you're using anything less than .4g BBs, you'll have too much hop and everything will shoot upwards. This is at the Lowest hop setting too.
"This bucking is nice but not for a PDI hop up chamber. I got this for the PDI hop up unit for my Javelin M24 and when I tried to take it out, the barrel tore the inside and cut the outside. If you thinking of getting this for a sniper rifle using a PDI, I would recommend you keep looking.
-good bucking on its own
-doesn't work well in a PDI hop up unit
Discuss about Matrix Advanced - Silica Airsoft AEG Hopup Buckings (Set of 2) - 80 Degree / 480~630 FPS with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!