Evike.com
■  Policies
■  Forum
■  About Us
■  Order Info
■  Privacy Policy by TRUSTe
■  Evike Super Store
■  FAQ
■  Coupon Codes
■  Link Exchange
■  Career
■  Airsoft Fields
■  Warranty Services
■  Sponsorship
■  Testimonials
■  Tech Corner
■  Contact Us
Online Payments
   
Privacy Policy by TRUSTe
PolarStar Airsoft PR-15 V2 Gen3 Fusion Engine Electro-Pneumatic Gearbox Kit
Model : [GB-PS-FEV2G3]
Location : [U11-002]
 (5 customer reviews)
$500.00

This item is currently out of stock!!

*This is the newest version of Polar Star PR-15 gearbox and the plug type you receive will reflect the newest model.

PolarStar Airsoft V2 Gen3 Fusion Engine Electro-Pneumatic Gearbox Kit

The PolarStar Gen3 V2 Fusion Engine takes place of any Ver. 2 AEG Gearbox as a direct drop-in. It is powered via a High Pressure Air (HPA) setup and only requires a small battery (7.4v-9.6v NiMH or Lipo recommended) to power the onboard computer known as the Fire Control Unit (FCU). This kit comes with the necessary core parts to convert your AEG M4 / M16 to the Fusion System, and can be used with other Ver 2 Airsoft AEGs by replacing the selector plate, trigger and Fusion Engine nozzle (additional FE nozzles, triggers and selector plates not included). HPA stabilizer and tank required but not included.

The Fusion Engine is completely adjustable via the FCU and by varying the pressure from the HPA system (90-120 PSI). The Fusion Engine Kit comes equipped with PolarStar's Blue Nozzle (FPS listed below). Optional Color-coded nozzles are available to be able to move the Maximum FPS Range up or down.

The Fusion Engine is compatible with AEG style Hopups and Inner Barrels allowing the use of standard upgrade parts. A great thing about the Fusion Engine is that stripped gears, blown motors, fried batteries, and just about every other problem with AEG's no longer exist. Say goodbye to hundreds of dollars on maintenance and countless hours fixing your gun!

HPA system not included

Features:
- 100% Engineered and Assembled in the USA!
- Revolutionary Electro-Pneumatic Fusion Engine allows for an HPA setup in a compact space
- Instant Trigger Response (literally, instant!)
- Complete control of the system via the Fire Control Unit (FCU)
- Fully Adjustable FPS and Rate of Fire
- User adjustable Semi/Full-Auto, Semi-Only, 2rd-9rd Burst, and Open Bolt and Closed Bolt Firing modes
- Consistent performance, regardless of the temperature
- Fine Tuning of the Nozzle Dwell allows for accurate BB feeding with any magazine
- Maximum FPS limit can be raised or lowered with optional Color-coded Air Nozzles (Not included)
- Uses Standard TM AEG Hopup and Inner Barrel design allowing for AEG upgrade parts and the use of standard AEG magazines
- New GEN3 design now interfaces with all V2 AEG triggers and selector plates for cross compatibility with many different models and platforms

Compatibility: For use with any Tokyo Marui, Matrix, JG, G&G, G&P, DBoy, Echo1, VFC or other Ver 2 Gearbox AEG Rifle. Kit comes with M4 / M16 selector plate, trigger, and FE nozzle (other Ver. 2 AEG selector plates, triggers and FE nozzles not included)

Nozzle Color: Blue
Max Velocity: (0.20g BB @ 120 PSI)
275mm Inner Barrel: 380 FPS
380mm Inner Barrel: 405 FPS
509mm Inner Barrel: 435 FPS
*FPS listed is approximate. FPS will increase as barrel length increases

Rate of Fire: 500 RPM - 1800 RPM, Adjustable
PSI Operating Range: 90-120 PSI (Do NOT exceed 120 PSI, otherwise you may damage the internals)
Power Type: High Pressure Air Tank (Tank and Regulator System not included)
Package Includes: Pre-Assembled Fusion Engine, FCU
Battery: 7.4v-9.6v NiMH or Lipo (Not included).

Manufacturer: PolarStar Airsoft (External Parts OEM: VFC)


Required Equipment:
The Fusion Engine is a very low maintenance, advanced system that requires a few necessary parts:

  • M4/M16 or other Ver. 2 AEG Rifle (replaces the original gearbox)
  • HPA Tank
  • Stabilizer/Regulator Remote Line
  • Small Battery (7.4v-9.6v recommended. Can be LiPo or NiMH)
  • *The above items are not included, but are available here at Evike.com

    Disclaimer on High Pressure Air (HPA) Systems:

    HPA Tanks are a safe and effective source of power though there are some precautions you must follow. Please follow these proper precautions when using HPA systems:

    - NEVER put oil in the fill valve of the tank, or else the tank can combust on refill and serious injury can occur. Lubrication is not necessary in HPA systems.
    - ONLY allow properly trained professionals to fill your HPA tank.
    - ALWAYS double check your Regulator pressure. Never raise the regulated pressure above 120 PSI
    - Make sure to have your tank Hydro-Tested when necessary. (Usually 3-5 years from date marked on tank, depending on make and model)
    - Be sure to properly transport your HPA tank. Store in a safe, secured place when in a vehicle, and be sure to stow in a bag or tank cover when in use. Avoid dropping the tank on hard surfaces as this can seriously damage the tank and lead to failure.
    - Always turn off the tank and bleed the air line when you are done. This will ensure a longer tank and system lifespan.


    This product was added to our catalog on Wednesday 23 November, 2011.
    Notifications

    Average Rating:
    Current Reviews: 5
    5 of 5 Stars! Submited By: Josh K. on 05/04/2013
    Wow. Just. Wow. Polarstar, I would like to thank you for, well. Everything!
    This thing is amazing. I couldnt ask for more!

    Just to give you a background on me, I have been a technician for a few years now, I have setups ranging from 400fps @ 40rps to 600fps @ 20rps, and this thing can beat all of them with the swap of a nozzle and a few seconds of changing the FCU.
    Now this can be used as a great advantage, or in a very horrible way.
    Please abide by your fields velocity limits and DONT give all P* users a bad name!

    Another thing that many people dislike about P*s is the need to carry an air rig.
    Let me dispel that myth by just saying that you barely notice it.
    I use a camelbak hydration system and it works great with the Ninja tanks.
    The air rig itself feels like a sling and barely gets in the way.

    I see a ton of compatibility questions here and I would like to answer them:

    1) Will it fit in TM, VFC, King Arms, A&K, G&G, JG, CYMA, G&P, Matrix, AIM or other TM spec bodies?
    Yes.

    2) Will it fit in a ICS split body?
    No

    3) Will it fit in a KWA?
    Yes, but not without modifying the body. KWA body's are not to TM spec and you will need to do some sanding. Pain in the but, but it can be done.

    4) Will it fit into other V2 gearbox guns?
    Yes, It will fit, however it will not function/feed correctly. You will need selector switches as well as P* nozzles specific to your gun (IE like a G3 or similar)
    Polarstar is working on getting them out, so eventually it will be a yes :)

    How does it work?
    1) Pull out your standard V2 gearbox
    2) drop this in.
    3) profit beyond everything

    The Polarstar engine is a quantum leap in airsoft mechanics.
    By utilizing HPA and solenoids, and eliminating the many parts that break in a standard gearbox, you get a system that literally, by definition, CANNOT break.

    Trigger response is literally INSTANTANEOUS,
    you can adjust RoF anywhere from like 8rps to 70rps,
    FPS can be adjusted by changing the nozzle, (easy thing to do, takes 2 mins max)
    You can also adjust how much air the engine pumps out of the barrel, which means you can actually utilize a 700mm+ barrel effectively, while in a standard AEG it is normally impossible, even with boreup kits and such.

    Pros:
    Everything
    Adjustable ROF
    Adjustable FPS
    Adjustable airflow for super long barrels.
    Instantaneous trigger response.
    Programmable burst mode
    MADE IN THE USA!!!! BEST OF THE BEST!!
    Drops in almost any standard M4 body.
    extremely consistent, literally +-2 FPS deviation between shots at max (with a good hopup/bucking combo)

    Cons:
    $$$ Cost
    Air Rig is extra
    Tank is extra.

    Overall, this is the best airsoft system on the market.
    Polarstars can run insane setups without any stress on the system (Google P*'s 1,000,000rd stress test)

    The initial cost of the system can seem like a turn-off for most players, but the thing is, if you have nice $400 base gun, you will have to pay $100 to get it to a 400@40rps setup, plus maintaining the darn thing will cost at least another $50 every few months when parts break and stuff, so over time it will save you money if you run high ROF or high FPS setups.

    Its worth it. Trust me. Getting another for my AK once I can afford it :P
    Again, its totally worth EVERY SINGLE PENNY.
    5 of 5 Stars! Submited By: Chad I. on 10/23/2012
    If I could give the PolarStar Fusion Engine Ten Million stars I would. Polarstar has taken the bar for Airsoft and thew it into space.

    I have a custom Classic Army G3A3 that I had Bingo Airsoft install the Fusion Engine into and flat-hop my hop-up. Using .32 Elite Force Bio BB's 300 Ft range is nothing. It looks like you are firing a laser when you fire.

    A lot of people do not like the fact that that you have to use a HPA tank and line. Frankly you hardly notice it. Throw the tank in an assault pack and you are golden. Anyway having the tank on your back normaly equals your rig out. Also the Fusion Engine itself is quite a bit lighter than a normal gearbox.

    The FCU is very easy to use. You can set your ROF, can set it to 2-9 round burst, or set it to Open or closed bolt witch can increase your accuracy

    The best part of the Fusion Engine is the fact you can tune your weapon in to the exact FPS you wish with no tools. Just do not go over the limit of 120 PSI, You can damage the Engine. Im running mine at 45 PSI and Im getting 420 FPS.

    The Fusion Engine uses very littel power too, you can run it on the smallest Lipos ever, even small enough to fit into the buffer tube. Ive seen people even use 9v Batterys with a JST connector to run it. If you use a normal NiMH battery and play every weekend you might have to charge your battery every other time you go out.

    The only draw back to the Polarstar Fusion Engine is the fact that you need a HPA fill station. A lot of Airsoft parks around the states are also paintball parks so you will have a fill station. But there are a lot of Indoor places that are just Airsoft and probably wont have a fill station. What our Airsoft team dose is bring a SCUBA tank with us and we have air all day. Not the cheapest option but for a team that most people on it have Polarstars it makes sence.

    Its worth every penny.
    5 of 5 Stars! Submited By: jason s. on 02/15/2012
    I recently purchased this in November 2011, and once I got it in my SR-15 I put all of my other AEG's up for sale. I have had AEG's ranging from Dept store brands, Echo 1, G&G, CTW and PTW's, and I have to say this is the best setup ever. I know a lot of people think the tank is weird to carry around, but truthfully the air line runs with my tactical sling to my hydro backpack and it is easily forgotten/barely noticeable.

    I played a few games with it in very low temperatures, and it performed amazingly all day long (_40 degrees F) , it is the first time I've ever been able to play in February in Michigan and not have a catastrophic failure like my other AEGs.

    This thing is amazing, and I am now contemplating buying a second one to convert my loaner gun, since its a normal AEG and has broken 4 times in the last 2 years, because people shoot full auto for a few to many seconds. This gun can shoot on full auto into it runs out of air/bb's at around 40RPS , 425 FPS!!! try that in an AEG...
    More Reviews Write Review

    Pre-Order Estimated Arrival: 07/2013 --- Guerilla Air Myth 62/3000 HP System Aluminum Tank with 4-Port Regulator - (Green)

    Pre-Order Estimated Arrival: 07/2013 --- Guerilla Air Myth 62/3000 HP System Aluminum Tank with 4-Port Regulator - (Green)
    Pre-Order Estimated Arrival: 07/2013 --- Guerilla Air Myth 62/3000 HP System Aluminum Tank with 4-Port Regulator - (Black)

    Pre-Order Estimated Arrival: 07/2013 --- Guerilla Air Myth 62/3000 HP System Aluminum Tank with 4-Port Regulator - (Black)
    z Remote Stabilizer and Regulator Line Set for PolarStar PR-15 Airsoft EPAR Rifle

    z Remote Stabilizer and Regulator Line Set for PolarStar PR-15 Airsoft EPAR Rifle
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Red
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Red
    Redline Airsoft Firebase Air System for PolarStar Fusion Engine
    Redline Airsoft Firebase Air System for PolarStar Fusion Engine
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Black
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Black
    Pre-Order Estimated Arrival: 07/2013 --- Guerilla Air Myth 62/3000 HP System Aluminum Tank with 4-Port Regulator - (Black)
    Pre-Order Estimated Arrival: 07/2013 --- Guerilla Air Myth 62/3000 HP System Aluminum Tank with 4-Port Regulator - (Black)
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Green
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Green
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Silver
    PolarStar Air Nozzle for Ver.2 Fusion Engine Airsoft EPAR - M4 Series / Silver
    Evike.com Airsoft 6mm BB Speed Loader for All Airsoft Magazines (transparent)
    Evike.com Airsoft 6mm BB Speed Loader for All Airsoft Magazines (transparent)
    $5.00 $3.00
    <b>Matrix 0.20g Match Grade 6mm Airsoft BB - 5000/ White</b>
    Matrix 0.20g Match Grade 6mm Airsoft BB - 5000/ White
    $11.99 $10.00
    <b>JG 350r Metal Hi-Cap Magazine For M4 M16 L85 SCAR Series Airsoft AEG (One)</b>
    JG 350r Metal Hi-Cap Magazine For M4 M16 L85 SCAR Series Airsoft AEG (One)
    $20.00 $12.00
    Intellect 9.6V Small Type 1600mAh Airsoft Battery Pack (Butterfly Configuration)
    Intellect 9.6V Small Type 1600mAh Airsoft Battery Pack (Butterfly Configuration)
    $35.00 $28.00
    AIM All Purpose Silicon Lubricant Oil Spray for Airsoft / Firearm
    AIM All Purpose Silicon Lubricant Oil Spray for Airsoft / Firearm
    $4.50 $4.00
    <b>Matrix 0.20g Match Grade 6mm Airsoft BB (10,000 RDS / White)</b>
    Matrix 0.20g Match Grade 6mm Airsoft BB (10,000 RDS / White)
    $22.99 $20.00
    <b>Evike.com 0.25g MAX Precision 6mm Airsoft BB (5000 Rounds / White) by Matrix</b>
    Evike.com 0.25g MAX Precision 6mm Airsoft BB (5000 Rounds / White) by Matrix
    $15.00 $12.00
    <b>Evike.com 0.20g MAX Precision 6mm Airsoft BB (5000 Rounds / White) by Matrix</b>
    Evike.com 0.20g MAX Precision 6mm Airsoft BB (5000 Rounds / White) by Matrix
    $13.00 $10.00
    Matrix 0.25g Match Grade 6mm Airsoft BB - 5000/ White
    Matrix 0.25g Match Grade 6mm Airsoft BB - 5000/ White
    $14.00 $11.50

    Home  |  Policies & Warranty  |  About Us  |  Order Info  |  Privacy Policy by TRUSTe  |  Evike Super Store  |  FAQ  |  Coupon Codes  |  Contact Us  |  Airsoft Gaming Photo  |  Airsoft Field  |


    By accessing www.evike.com and using Evike.com's services and products, you agree to the following:
    You are at least 18 years of age. All goods sold on www.evike.com are for Airsoft gaming purpose only. All sale transactions are completed in our California warehouse under California laws and regulations. All shipping is done via buyer-selected/paid carriers in California. All disputes will be resolved in Alhambra, California. You assume full responsibility of all risks, liabilities, damages, and injuries. You are responsible for compliance with your own local, state, country or jurisdiction's laws and regulations governing Airsoft. You will not hold Evike.com Inc., its owners, agents, employees, and affiliates responsible for any legal actions, liabilities, damages, penalties, claims, or other obligations caused by your ownership of any Evike.com products. All Airsoft replicas are sold with bright orange tip to comply with U.S. federal laws and regulations. Evike.com Inc. is not responsible for injuries or damages caused by improper usage, user errors, stunts, usage with or without adult supervision, modifications or stupidity. Please visit our warranty and disclaimer pages for more information. All content are subject to updates without prior notice.
    Last Updated:We update daily to bring you the best pricing and newest products.
    Designated trademarks and brands are the property oftheir respective owners.
    Copyright © 2013 Evike.com All Rights Reserved.

    Current Parse Time: 1.646 s with 77 queries