Matrix Steel CNC Airsoft AEG Gear Set (Super High Speed) / 13:1

$28.00 $22.40

Model: Gears-MTX-SHS
x

6 Customer Reviews

by jake h. on 11/20/2014
"I Bought this gear set for my ics cxp15 hoping to make it the ultimate cqb gun. However since ics has split gearboxes and a custom extended anti-reversal latch the spur gear gets in the way and the gears will not spin when the gearbox is closed up. So I was disappointed but not there fault. So then I tried them in a full metal agm m4 I have and they did not work in that either. The spur gear had to be shimmed up so high to not hit the bottom bushing that the gearbox would not close. So finally I put them in my g&g combat machine carbine with no other mods and they fit awesome. It definitely shot faster. Not as fast I would have hoped but I also swapped a faster motor into it and it shoots crazy fast now.

Pros:
Good price
Shoots faster
More durable
Better made than stock gears
Fits g&g m4

Cons:
Didn't fit ics m4
Didn't fit agm m4

Overall id recommend this set for anyone looking for a ROF boost wih a lower budget. Just make sure to do your research before purchasing to make sure it's compatible with your specific gearbox. I also recommend getting a high torque or high speed motor, this will make your gun shoot insanely fast with this gear set.
by zack o. on 09/09/2014
"I got a set of these for my m4 cqb build and they work fantastically.all the parts that tou should know about in my gearbox (they affect performance) these guys, shs polycarb piston with full metal teeth, and an echo 1 ht motor with an m100 spring, with well shimmed gears. im getting 27-30ish rps on an 11.1v 20c batery. over all a good buy for people who want good trigger response and speed.
by chandler w. on 07/11/2013
"An amazing set of gears. They have a slightly shorter shaft length *shwing* which is corrected by a couple extra shims. The part that threw me off however was when I saw the SHS trademarks on the gears. That same set not in a matrix box would cost less at anyother location, but oh well.

After doing some tests, I was able to clock rps at 18.7 using the stock JG magnum motor and a 7.4v lipo. That translates out to about 1000 rpm. However I used the high speed gears to increase trigger response and prevent lock up in the gears. I recommend using a sector clip(which i use) to keep bbs from jamming in the mag or preventing a good feed.

pros:
1000 rpm with stock motor and 7.4v
Great trigger response
no gear lock up

cons:
rebranded SHS. not really a con, just a nit pick or pet peeve

Matrix Steel CNC Airsoft AEG Gear Set (Super High Speed) / 13:1

Gear Set Type: Super High Speed.
Gear Ratio: 13:1
Spring: Recommended M115 and Under.
Battery: Recommended 11.1V and Under.
For: V.2, V.3, and all gearboxes that use standard type AEG Gears. (M4, AK, MP5, G36, P90 and other compatible AEG models.)
Material: Steel.
Production Type: CNC Machining.
Manufacture: Matrix Tactical Systems / Hong Kong

Features:
Reinforced Gear Set.
Low Noise.
Great Cycle Continuity.
CNC Steel Processing.

Set Includes: Reinforced CNC Steel Gear Set.
  1 x Sector Gear
  1 x Spur Gear
  1 x Bevel Gear

Airsoft AEG Gears 101
- Matrix Super High Speed: 13:1 Gear Ratio. ~10 RPS over Normal Torque.
  Suitable for springs M110 and under.
- Matrix High Speed: 16:1 Gear Ratio. ~5 RPS over Normal Torque.
  Suitable for springs M120 and under.
- Matrix Normal Torque: 18:1 Gear Ratio. Standard AEG Gear Set.
  Suitable for springs M135 and under.
- Matrix High Torque: 100:300 Quiet Gear Ratio. Pulls up to M160 Spring.
  Suitable for springs M150 and under.
- Matrix Super High Torque: 32:1 Gear Ratio. The highest torque gear set we offer. Pulls up to M200 springs.

Selecting Your AEG Gears:
Torque: Force to rotate.
Just like your car and other applications in life, Airsoft AEG gears follows the same physics behind it all.
Gear sets increase it's "torque" output by increasing the number of teeth. Which results a longer rotation and higher torque.
Keep in mind, generally you increase torque of your gearbox to enable pull of stronger springs and lower the amount of work on your motor and battery.

Facts:
- Stronger Torque pulls stronger springs.
- Stronger spring slows down rate of fire.
- Strong battery increases rate of fire.
- High Performance = High Rate of wear and tear.
This product was added to our catalog on Monday 21 June, 2010.

Wanna chat about Matrix Steel CNC Airsoft AEG Gear Set (Super High Speed) / 13:1?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

Items on Sale