PolarStar PAKS-74UN Electro-Pneumatic Airsoft Rifle
The PolarStar PAKS-74UN EPAR (Electro-Pneumatic Airsoft Rifle) takes advantage of the revolutionary Fusion Engine. This completely original design by PolarStar Airsoft allows you to have the first gun in the history of Airsoft that can be completely adjusted on the spot via the onboard computer. Not only can you adjust your FPS, but also your Rate of Fire, Firing Mode, Nozzle Dwell (for BB feed fine tuning), and more.
The Fusion Engine takes place of the AEG Gearbox as a direct drop-in. It is powered via a High Pressure Air (HPA) setup and only requires a small battery (7.4v-9.6v NiMH or Lipo recommended) to power the onboard computer known as the Fire Control Unit (FCU).
The Fusion Engine is completely adjustable via the FCU and by varying the pressure from the HPA system (90-120 PSI). The gun comes equipped with PolarStar's Blue Nozzle (320-370 FPS on the Carbine). Optional Color-coded nozzles are available to be able to move the Maximum FPS Range up or down.
The PAKS-74UN uses an AEG style Hopup and Inner Barrel design allowing the use of standard upgrade parts. Another great thing about the PAKS-74UN and Fusion Engine is that stripped gears, blown motors, fried batteries, and just about every other problem with AEG's no longer exist Say goodbye to hundreds of dollars and countless hours fixing your gun!
HPA system not included, but will be available soon right here at Evike.com! Features: 100% Engineered and Assembled in the USA! Revolutionary Electro-Pneumatic Fusion Engine allows for an HPA setup in a compact space Instant Trigger Response (literally, instant!) Complete control of the system via the Fire Control Unit (FCU) Fully Adjustable FPS and Rate of Fire User adjustable Semi/Full-Auto, Semi-Only, 2rnd-9rnd Burst, and Open Bolt and Closed Bolt Firing modes Consistent performance, regardless of the temperature Fine Tuning of the Nozzle Dwell allows for accurate BB feeding with any magazine Maximum FPS limit can be raised or lowered with optional Color-coded Air Nozzles (Not included) Uses Standard TM AEG Hopup and Inner Barrel design allowing for AEG upgrade parts and the use of standard AEG magazines Stamped Steel Receiver Real Wood Hand Guard Steel Folding Stock Nylon Fiber Motor Grip Integrated AK Scope Mount (Scope and Scope Mount Base not included) Adjustable Front and Rear Sights Length:
515mm / 730mm (Folded / Total) Inner Barrel:
~275mm Magazine Capacity:
70rd Mid-Capacity. Compatible with VFC, Matrix, G&G, Tokyo Marui and other similar AK Series Airsoft AEG Magazines Muzzle Velocity:
320-370 FPS (Measured with 0.20g BBs), Adjustable Rate of Fire:
500 RPM - 1800 RPM, Adjustable Nozzle Color:
Blue PSI Operating Range:
90-120 PSI (Do NOT exceed 120 PSI, otherwise you may damage the internals) BBs:
6mm High Quality Matrix 0.20g BBs or heavier. (PolarStar recommends 0.28g and heavier for best performance) Power Type:
High Pressure Air Tank (Tank and Regulator System not included) Fire Modes:
Semi-Auto, Adjustable Burst, Full-Auto, Safety Package Includes:
Gun, Magazine, Manual Battery:
7.4v 250mAh Custom Lipo (Gun comes wired with a JST connector. FCU and battery connector located in top battery tray)
Custom Battery available here at Evike.com!
Yes, Adjustable Manufacturer:
PolarStar Airsoft (External Parts OEM: VFC) Required Equipment:
The PAKS-74UN is a very low maintenance, advanced system that requires a few necessary parts: HPA Tank Stabilizer/Regulator Remote Line Small Battery (7.4v 250mAh Lipo recommended. Available here at Evike.com)
*The above items are not included, but are available right here at Evike.com Disclaimer on High Pressure Air (HPA) Systems:
HPA Tanks are a safe and effective source of power though there are some precautions you must follow. Please follow these proper precautions when using HPA systems:
- NEVER put oil in the fill valve of the tank, or else the tank can combust on refill and serious injury can occur. Lubrication is not necessary in HPA systems.
- ONLY allow properly trained professionals to fill your HPA tank.
- ALWAYS double check your Regulator pressure. Never raise the regulated pressure above 120 PSI
- Make sure to have your tank Hydro-Tested when necessary. (Usually 3-5 years from date marked on tank, depending on make and model)
- Be sure to properly transport your HPA tank. Store in a safe, secured place when in a vehicle, and be sure to stow in a bag or tank cover when in use. Avoid dropping the tank on hard surfaces as this can seriously damage the tank and lead to failure.
- Always turn off the tank and bleed the air line when you are done. This will ensure a longer tank and system lifespan.
This product was added to our catalog on Friday 02 August, 2013.