PolarStar PR-15 CQBR Electro-Pneumatic Airsoft Rifle

$670.00

This item is currently Out of Stock

Usually restocked within 1-3 weeks. Add to your wishlist to stay posted!

Model: EPAR-PR15-105
This item is MAP controlled
The manufacturer of this product enforces a strict minimum advertised price (MAP) policy which excludes this product from any additional discount coupon codes. This item, however, may qualify for free shipping. Click here for details.
x

1 Customer Review

by George M. on 08/08/2012
"I have had my PR-15 for a few months now and I have to say I believe it to be the best airsoft gun you can buy right now, and for all those who don't like the idea of a hose connecting your gun to your hydration pack, I have had absolutely no problem with it and infact you don't even notice it.

Overall
++Pros++
-ability to achieve effective ranges of around 180ft with a 270mm 6.01mm inner barrel and red nozzle shooting .43g BBs, and the ability to do this all day with no burnt out motors or stripped gears
-adjustable burst settings ranging between 2 round all the way to 9 round or just set it to full auto
-virtual no delay between pulling the trigger and firing in open bolt mode, and when set to closed bolt mode there is no delay plus slightly higher accuracy.
- adjustable nozzle dwell time and air volume, meaning if you put a really long barrel on the PR-15 you can set the Fusion engine to put out air the entire time the BB is in the barrel unlike in AEG's where extremely long barrels start to reduce performance.
-low long-term cost
-very high quality externals, NO wobble between upper and lower receivers, no barrel wobble, and no buffer tube wobble.
-the body is actually anodized black like a real M4, not painted this means no chipping and the anodizing creates a very hard outer layer on the aluminum.

--Cons--
-requires an HPA tank
-no more satisfaction of shimming your gears just right and then having your gearbox explode lol
-high initial cost.
*Red Dot Scope not included

PolarStar PR-15 CQBR Electro-Pneumatic Airsoft Rifle

The PolarStar PR-15 EPAR (Electro-Pneumatic Airsoft Rifle) takes advantage of the revolutionary Fusion Engine. This completely original design by PolarStar Airsoft allows you to have the first gun in the history of Airsoft that can be completely adjusted on the spot via the onboard computer. Not only can you adjust your FPS, but also your Rate of Fire, Firing Mode, Nozzle Dwell (for BB feed fine tuning), and more.

The Fusion Engine takes place of the AEG Gearbox as a direct drop-in. It is powered via a High Pressure Air (HPA) setup and only requires a small battery (7.4v-9.6v NiMH or Lipo recommended) to power the onboard computer known as the Fire Control Unit (FCU).

The Fusion Engine is completely adjustable via the FCU and by varying the pressure from the HPA system (90-120 PSI). The gun comes equipped with PolarStar's Blue Nozzle (330-380 FPS on the CQBR). Optional Color-coded nozzles are available to be able to move the Maximum FPS Range up or down.

The PR-15 uses an AEG style Hopup and Inner Barrel design allowing the use of standard upgrade parts. Another great thing about the PR-15 and Fusion Engine is that stripped gears, blown motors, fried batteries, and just about every other problem with AEG's no longer exist Say goodbye to hundreds of dollars and countless hours fixing your gun!

HPA system not included, but will be available soon right here at Evike.com!

Features:
- 100% Engineered and Assembled in the USA!
- Revolutionary Electro-Pneumatic Fusion Engine allows for an HPA setup in a compact space
- Instant Trigger Response (literally, instant!)
- Complete control of the system via the Fire Control Unit (FCU)
- Fully Adjustable FPS and Rate of Fire
- User adjustable Semi/Full-Auto, Semi-Only, 2rnd-9rnd Burst, and Open Bolt and Closed Bolt Firing modes
- Consistent performance, regardless of the temperature
- Fine Tuning of the Nozzle Dwell allows for accurate BB feeding with any magazine
- Maximum FPS limit can be raised or lowered with optional Color-coded Air Nozzles (Not included)
- Uses Standard TM AEG Hopup and Inner Barrel design allowing for AEG upgrade parts and the use of standard AEG magazines
- CNC Machined Aluminum Receiver
- Nylon Fiber Motor Grip, Handguard, and Stock
- Removable Rear Sight
- Unique Serial Number

Length: 685mm-770mm
Inner Barrel: 275mm
Magazine Capacity: 120rd Mid-Capacity. Compatible with VFC, Matrix, G&G, Tokyo Marui and other similar M4 / M16 Series Airsoft AEG Magazines
Muzzle Velocity: 330-380 FPS (Measured with 0.20g BBs), Adjustable
Rate of Fire: 500 RPM - 1800 RPM, Adjustable
Nozzle Color: Blue
PSI Operating Range: 90-120 PSI (Do NOT exceed 120 PSI, otherwise you may damage the internals)
BBs: 6mm High Quality Matrix 0.20g BBs or heavier. (PolarStar recommends 0.28g and heavier for best performance)
Thread Direction: 14mm Negative
Power Type: High Pressure Air Tank (Tank and Regulator System not included)
Fire Modes: Semi-Auto, Adjustable Burst, Full-Auto, Safety
Package Includes: Gun, Magazine, Manual
Battery: 7.4v 250mAh Custom Lipo (Gun comes wired with a JST connector. FCU and battery connector located in stock tube)


Custom Battery available here at Evike.com!

Hopup: Yes, Adjustable

Manufacturer: PolarStar Airsoft (External Parts OEM: VFC)


Required Equipment:
The PR15 is a very low maintenance, advanced system that requires a few necessary parts:
  • HPA Tank
  • Stabilizer/Regulator Remote Line
  • Small Battery (7.4v 250mAh Lipo recommended. Available here at Evike.com)
  • *The above items are not included, but will be available on our website soon

    Disclaimer on High Pressure Air (HPA) Systems:

    HPA Tanks are a safe and effective source of power though there are some precautions you must follow. Please follow these proper precautions when using HPA systems:

    - NEVER put oil in the fill valve of the tank, or else the tank can combust on refill and serious injury can occur. Lubrication is not necessary in HPA systems.
    - ONLY allow properly trained professionals to fill your HPA tank.
    - ALWAYS double check your Regulator pressure. Never raise the regulated pressure above 120 PSI
    - Make sure to have your tank Hydro-Tested when necessary. (Usually 3-5 years from date marked on tank, depending on make and model)
    - Be sure to properly transport your HPA tank. Store in a safe, secured place when in a vehicle, and be sure to stow in a bag or tank cover when in use. Avoid dropping the tank on hard surfaces as this can seriously damage the tank and lead to failure.
    - Always turn off the tank and bleed the air line when you are done. This will ensure a longer tank and system lifespan.


    This product was added to our catalog on Tuesday 23 August, 2011.

    This item is currently Out of Stock. Most out of stock items are restocked within 1-3 weeks. Some items may take longer. Please add this item to your wishlist to keep posted on its availability.

    Wanna chat about PolarStar PR-15 CQBR Electro-Pneumatic Airsoft Rifle?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Items on Sale