"Upon receiving this gun, I was ecstatic to just look at it. It was heavy, realistic and well built. The body is full metal, except for the hand guard, grip and stock. As much as Inloved the looks, there were major issues with mine. First off, mine did not come with a battery and charger. Kind of pointless if there's no airsoft store near my location and I can't use my gun. Second, the bolt gets stuck every time I pull it back. Third, the grip was even looser than the stock. I fixed it easily though by tightening the screw. From what I can see, the CYMA EBR is a great gun for looks, but terrible with some parts of it. I don't know if anyone else has these problems with theirs, but I am just pointing out what is wrong with mine. Overall, I do not highly recommend this gun. Too many issues that I cannot fix. "CYMA M14 RIS EBR
There are several things I would like to mention about this gun.
1: This gun is quite heavy, although not unbearably so. I know quite a few reviewers have remarked upon this already, but it never quite seems to get it across. I ran with this gun for four hours with no sling, and afterwards I was EXHAUSTED.
2: The EBR is almost completely metal, however, the stock and the pistol grip are polymer. This tends to make the gun seem rather front heavy, although it is slightly balanced by the fact that it has battery storage in the crane stock. I would recommend running this gun with a 9.6v battery, due to the fact that the stock battery is an 8.4v and will not maximize the performance of the gun.
3: I, unlike many of the other reviewers HAVE used this gun stock (airsoft lingo translation: without upgrades), and it preforms very well. It has decent range for a stock weapon, and chrono'd in at 360fps (average) wih a maximum deviation of 4fps. This is ideal for a dmr in the making, because constant and dependable power means the bb will constantly and dependably be going to the same distance.
4: I have a few upgrade ideas for experienced and inexperienced airsofters out there.
4a: The first thing that is essential to the making to a dmr is a scope(Available at evike!). It really doesn't matter what kind of scope you have, but I will tell that for your scope mounts, you will need risers to get your scope above the built-in iron sights. Next, I recommend a foregrip and a bipod (yes, both). Also, if you really want to, ou could put on a tactical light, although I really don't see the point in this (it's not like you're going to be using this to clear rooms).
4b: I recommend that next you get an m135 or an m140 spring(both available at evike!), to get a higher fps rating, and ultimately more range.
4c: My next recommendation is a stainless steel 6.03 or 6.02 500-550mm precision inner barrel (once again, available at evike). I do NOT recommend getting a 6.01 precision inner barrel due to the fact that bbs will jam if you fire too fast in semi-automatic. Another alternative, if you want to skip recommendation 4d, you can purchase a "miracle barrel". These barrels will run you pricey, and usually cost between $70 and $80 (sadly, these are unavailable at evike).
4d: If you do take my recommendation for step 4c, you will now have an inner barrel that is sticking out of the end of your gun. To cover this, you will need a barrel extension or mock suppressor. A good lightweight (although still metal), option is the 'spartan doctrine 200mm mock suppressor'.
6: The final and saddening thing you must now do is to remove the full-auto capability of your gun. Sorry guys, putting in a mosfet does NOT count in most fields. this has been a thorn in my side for quite a while. Three and Four-round burst are life when it comes to long-range assault rifles.
That has wrapped it up for my review and suggested upgrades for the CYMA M14 EBR. I hope you found it useful and informative.
~D. Williams "Upon purchasing my CYMA M14EBR I have been impressed. Solid metal railing and cage, outter barrel, upper...I bagan a search for plastic and was pleased at how little plastic is there (stock& handle). With only a few more screws,because of the cage, than the CYMA Field M14; this rifle has EEEEZZZZ internals to tech. I too "upgraded" ad found a huge improvement in range and accuracy(6.03innbar. , M90spring, 11.1v lipo). Sorry to the guy who got the lemmon, because this gun is feared and revered. GO CYMA, can't wait for the model without these negitaves:
1.Pistol grip comes loose often, kinda hard to tighten in field
2. Adjustable crane stock is cool, finding an 11.1 lipo with sufficiant mAh that fits, not cool.
3.A potmetal connection that holds under the barrel a crome rod to the bolt feature has broken on this and one of my field M14s. Fixing them was fun. They both broke at a point that was right where the rods come together and sheered all thread off inside.
THANKS TO EVIKE.COM!
ADAM Read More Reviews Write a Review
« Back to product description
CYMA M14 RIS EBR (Evil Black Rifle) Custom Full Metal Airsoft AEG Sniper Rifle - Black Features: Maximum realism with full metal receiver, barrel assembly and everything else that should be metal. Fully upgraded full metal Marui M14 Ver.7 gearbox system pre-upgraded to output 400 FPS. Features everything you will find on a M14 AEG rifle and more! Fully Automatic, Semi-Automatic and safety select fire. Adjustable hopup. Reinforced gearbox with high torque motor. Nylon Fiber Polymer Handguard Covers and Crane Stock Integrated Rail Interface System for additional external attachments. Integrated scope and dot sight ready scope rail. Adjustable Rear Sight Retractable AR-15 type crane stock for comfortable and steady firing. Integrated front and rear sling mounts. Length: 955mm-1040mm, Adjustable Weight: 4200g Inner Barrel: 420mm Magazine Capacity: 400 rounds Muzzle Velocity: ~400 FPS (Measured with 0.20g BBs) Gearbox: Full Metal Ver 7, Fully Upgradeable Motor: Short Type Fire Modes: Full Auto, Semi-Auto, Safety Package Includes: Gun, Magazine Battery: 9.6v Small Butterfly Type recommended (8.4v "Test Battery" and Wall Chargers may be included but not recommended. Please use a good battery for optimized performance.) Hopup: Yes, Adjustable Manufacturer: Matrix (USA Distribution) CYMA (OEM) VIDEO
This product was added to our catalog on Friday 21 September, 2012.
Wanna chat about
CYMA M14 RIS EBR (Evil Black Rifle) Custom Full Metal Airsoft AEG Sniper Rifle - Black?
Have questions about this item? We monitor these comments daily, but it may be faster to
email us directly or call us at 1-626-286-0360.
Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!