"First of all let me say I'm a gas gun noob like the majority of people that buy this kit. The word challenge is absolutely correct but it's still doable. The build itself was relatively simple but the tolerances on the pins and other parts is so tough that it makes some of the parts a pain to assemble. FYI the manual has a few errors. I would recommend downloading the inokatsu manual or watching YouTube guides. Overall though the gun is amazing and functions like an ar. What more do you need?
Good Rof with new buffer (comes with black one in updated version. Much better than the orange one it used to have
Difficult to assemble without a lot of tools
Many parts will need to be lubed and sanded to function well
Expensive upgrade parts and mags. (The stock parts should last a while though)
Overall 4.5/5 would highly reccomend to most airsoft players that know what they are doing "Absolutely AMAZING gun. Like said in previous reviews, if you're afraid to build this because it looks hard, you kinda should be during some assembly, but only some. But don't let that deter you. But i did find one major flaw in the system- soft pot metal internals that wear down fast, and the magpul upper receivers have a tendency to wobble side to side (very annoying), also the superb recoil shakes out the body pins, So if you can get ALL steel internals, a magic pin, and an anti relation pin set, you should be good to go :)
200$+ of Magpul furniture plus a Pmag for only 80$
Shoots very accurately and fast
Pretty easy to assemble
Good recoil for realism
Functions the closest to a real AR (WooHoo G&P!)
Bad pot metal internals
Wobbly upper (only on magpul edition)
Pins fall out frequently
Steel internals are always out of stock so they may be hard to find
Range is meh "This gun is awesome!it is very easy to build and at first I had to break mine in but it works very well. And don't think that this will be hard to build because I built it in less than 2 and a half hours and I have little to no experience with gas blowback rifles since I don't even own any other gbbr's and I only own one aeg. About the breaking in though one problem I had was that the pmag that came with it was a VERY tight fit in the mag well even after I sanded the inside of the mag well and some of the mag. Now for pros and cons.
Very light (lighter than my plastic aeg)
Mine came with the bolt stop and bolt assembled and it came with a speed buffer
The pmag is metal except for one piece on the front of the mag
39 round compacity for mag
Comes with lots of magpul awesomeness!
Comes with two nozzles or whatever there called (one for cqb and one for outdoor play)
Easy to assemble
If your bolt comes assembled than it is hard to install lower fps nozzle thing
Hard to find a barrel nut to fit any rail system besides the noveske (wich is sold out right now)
Pmag is tight fit at first
Over all awesome gun and don't decide not to get it because of the cons I listed you just have to break in the gun since no one has ever tested your gun or broken it in (wich is what they do on already built guns) Read More Reviews Write a Review
« Back to product description
*This is a challenge kit and the rifle will come "not assembled"
G&P WOC "Magpul M4" Airsoft Gas Blowback GBB Rifle Challenge Kit - Black
This is the ultimate in DIY Challenge Kits from G&P. This Evike.com Exclusive kit comes with everything you need including a very awesome PMAG GBB magazine to make a fully functional G&P Custom M4 WOC Full Metal GBB. Your opportunity to own a high quality G&P GBB M4 at a fraction of the normal price.
-WA Magpul Type Metal Body (Black) (WP140S)
-Magpul PTS MOE Handguard Kit (Black)
-WA Magpul Gas Blowback Magazine (39rds) (Black) (WP159S)
-WA M4A1 Aluminum Outer Barrel (WP49)
-M4 Flashider (Clockwise) (GP087C)
-Magpul PTS MOE Grip (Black)
-Magpul Rear Sight (Black)
-WA 6 Position Stock Pipe (WP59)
-Magpul PTS MOE Stock (Black)
-WA Steel Stock Ring (WP26)
-WA M4A1 Pipe Ring (WP30)
-WA Hammer Set (WP11)
-WA M4 Sear
-WA M4 Bearing Hammer Pin Set
-WA Bolt Stop
-WA SPR Type Cocking Handle (WP52)
-WA M4 Hammer Lock (WP57)
-WA Magazine Catch
-WA Forward Assist
-WA M4 Speed Buffer (WP154)
-WA Bolt Carrier (Negative Pressure)
This G&P M4 WOC Kit comes with the newly designed nozzle more efficient system as you will see. The manual still shows the old type nozzle but the kit will come with the new type!
What comes with this kit?
The G&P M4A1 Challenge Kit comes with all of the internal parts necessary including the Blowback System parts, Hopup System Parts, Barrel Assembly Parts, Receiver, Foregrip, Front and Rear Sights, Buffer Tube and Stock System.
Will I need to assemble anything?
The G&P Challenge kit is meant a Do-It-Yourself kit for
players and comes
disassembled. You will need a solid grasp on the inner and outer parts of Western Arms style M4 GBB's to be able to complete this kit.
Evike.com will not be responsible for any mishandling, damage, or other issues caused by the purchaser's inexperience or lack of knowledge on building this kit.
The G&P M4 GBB Challenge Kit is Western Arms compatible and can be used with Western Arms upgrade parts. Keep in mind, like any aftermarket parts, some modification may be required.
Does it come with a Magazine?
Yes, the G&P Magpul MOE M4 GBB Challenge kit DOES include a very awesome M4 Magpul PMAG GBB magazine.
**To comply with US Federal Regulations, all kits will come with a blaze orange muzzle device permanently affixed to the outer barrel. G&P magazines available here at Evike.com Disclaimer:
The supplied manual includes instructions on installation of the outdated Nozzle design. The updated Nozzle has been illustrated below.