G&G GR16 A2 Full Metal Full Size Airsoft AEG


This item is currently Discontinued

Model: AEG-GG-016-A2

4 Customer Reviews

by Quinten A. on 10/21/2010
"I got this gun on 10/21/10 and its by far one of the best guns i have ever got. its super acurate and is power ful. i got the 10 dollar battery that camewith it and it came charged and it shot good and hard. but i also got a 9.6 v large type and i cant wait to try the gun with that battery
by matt g. on 09/18/2010
"this gun is excellent. accurancy is phenomenal, rate of fire (with an 8.4) is also very good. weighs about ten pounds and if youve never held an m16 and you dont know the size, make sure you do, its a very long gun (im used to mp5s so..) as said before, if your looking for an m16a2, this is the one to get. there is one flaw, but its not the gun, its the magazine. i have 2 G&G mags, they feed well but the screw on the bottom of BOTH of them came out which causes the whole internals of the mag to slip out of the outer cartridge. simple enough fix though, just buy extra screws, or different mags. it shoots 360fps w/20s, consistently (not a guess, i chronoed it)..did i mention that its beautiful? you should know that.
by Justin C. on 04/13/2009
"A good classic platform, for all those USMC fans out there.

pros, has G&Gs excellent one piece outer barrel
decent gearbox for starters
Nylon fixtures, low profile trades
Best of all its an A2

Cons Ive had three of these, and each one had a pretty crappy upper to lower receiver fit. but then again so do the old mil spec real ones = )

Other than that if you what an A2 this is the one to get...

Available Options

DESCRIPTION : G&G GR16 A2 Full Size AEG Rifle. (Scope & scope mount not included.)
PACKAGE INCLUDES : GR16 A2 AEG, Manual, Loader, Cleaning Rod and Hi-cap magazine.
SPECIFICATIONS : Overall Length:1000mm
Weight: 2960g
Inner Barrel Length: 509mm
Tight Bore Barrel Dimension: 6.04mm
VELOCITY : 350~380 Feet Per Second (0.20g bb)
MAGAZINE : 450 rd hi-cap included
Power : Airsoft rechargeable battery packs
BB : 6mm
Features : -G&G Full Metal Aluminum Receiver.
-G&G Zinc Full metal and fully upgradeable reinforced gearbox.
-Built in precision tight bore barrel for maximum accuracy. Superb accuracy.
-G&G Steel high power full metal gear sets. (Newest version)
-Fully tuned up and upgraded internal.
-Uses all G&G / Classic Army and other M4/M16 series standard and high cap. magizines.
-G&G 25000 rpm High torque G&G ultra power motor.
-G&G Metal brass Bushing
-G&G High seal full metal Hop-Up chamber.
-G&G Nylon/Fiber Reinforced Piston.
G&G A.E.G. is truly today's "TOP OF THE LINE" A.E.G.
First Impression: For anyone that have ever seen an G&G A.E.G., have the gun and the box in hand, G&G AEG are no doubt guns with the BEST finish in terms of the external finish on the guns, material used and on their packaging. Their appearance and quality is solid. In a material comparison report showed that G&G uses MUCH higher quality material than other leading brands such as Classic Army.
Real Fire Arm History this AEG modelled after: M16 (more formally United States Rifle, Caliber 5.56 mm, M16) is the U.S. military designation for a family of rifles derived from the ArmaLite AR-15 and further developed by Colt starting in the mid-20th century. The M16 rifle family including the M16/A1/A2/A3/A4 has been the primary infantry rifle of the United States military since the 1960s. With its variants, it has been in use by 15 NATO countries, and is the most produced firearm in its caliber. The M16 entered Army service in 1964.
Internals: G&G uses more reinforcement internal parts than all leading brands. Tight bore barrel, metal bushing, reinforced piston, full metal hopup chamber, 25000rpm high torque motor, reinforced steel gear set, and reinforced gearbox are standards of all G&G AEG. (These reinforcement parts will normally cost you at least $200 or more on a Classic Army or Marui.). Which is why all G&G AEG comes with a 30 day warranty and full factory support. The manufacture stand behind their products unlike many other brands. The most important part of all, G&G internal is compatible with majority of the after market replacement and reinforced parts unlike Classic Army AEG (where most of the time you can only use cheap made in china parts exclusive manufactured by classic army).
Performance: Consistent power output. Due to the built in tight bore barrel, it is more accurate and have better grouping than AEG with stock barrel. (High quality bb such as Matrix, Excel, Marui recommended for all tight bore barrels). Great Range and power. Conclusion: There are many great value made in China A.E.G. out there for Airsoft starters, but once you are no longer a starter and you want an A.E.G. that will last, is consistent and something that is "TOP OF THE LINE", this G&G A.E.G. is your choice. Five years ago Tokyo Marui was the "TOP OF THE LINE", but due to Japan's regulations, they cannot have metal bodies and they do not offer reinforced internals since the power output is regulated in Japan.
AEG Shopping Guide
Manufacture MARUI G&G Classic Army JG / ECHO 1
Origin Japan Taiwan China China
Overall Finish / Quality Control 10 10 6 6
Warranty / Factory Support None 30 days None 14 days
Price Range $200~400 ~$200~400 ~$200~400 $100~160
Gearbox and Material (Reliability out of 10) 9 9 6 7
Power (Average) 280 FPS 350 FPS 300~330 FPS 360 FPS
Compatibility (Will it work with Systema, Matrix, G&P, Guarder and other after market upgrade parts?) Yes. Yes. No. CA Only. Yes.
This product was added to our catalog on Tuesday 01 January, 2008.

This item is Discontinued.

Wanna chat about G&G GR16 A2 Full Metal Full Size Airsoft AEG?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

Items on Sale