"Anyone considering buying the APS UAR should first search the Interwebs for information about the serious feeding problems it has. A design defect combined with poor quality control results in magazines not sealing properly, with the result that BBs won't feed. This doesn't seem to happen with all UARs, but for many of them it results in a gun that's practically useless. I regret buying this gun and I would strongly urge others to avoid it.
This is unfortunate because it is otherwise a nice gun -- a unique design with some nice features. (That's why I gave it 2 stars instead of just 1.)
P.S.: I bought this gun in December 2013, after APS issued its "improved" version to address a problem where mid-cap magazines wouldn't fit. That issue seems to be unrelated to the feeding problem.
Also FYI Evike honored an RMA for this gun but although the returned item will feed from the stock small magazines, it still won't feed BBs from any hi-cap magazine that we have tried unless we push the magazine firmly up into the body, and keep holding it there -- obviously not a workable solution in the field. "Well after my entire top receiver broke on my M4 for CQB, I need a new (preferably durable) CQB gun. This gun was on a pretty spanking deal for black Friday so I went ahead and ordered it. I must say I was very impressed. The gun is made of a very sturdy polymer and overall performed great. The barrel on it is one of the best I've seen in awhile. The only real problem I had was getting the orange tip off of the barrel (the easiest way I found was to just remove the top receiver, instructions are in the manual). I was a little disappointed with the motor but it performed just fine for CQB purposes. I found the gun to be accurate out to about 110-125ft (perfect for CQB). One thing if you are purchasing this gun is make sure you clean the barrel before use or the gun has a tendency to jam up on auto.
Overall I'm really happy with this purchase. I shoot rifles lefty and this is an ambidextrous gun so that was just great. I recommend a one-point bungee sling and an angled fore grip for attachments. Happy Shooting! "After seeing this gun for as low as 135$ on black friday I couldn't pass it up. First of all, this will be my second AEG, my first being a cheapo 90$ AEG that I needed to replace. I couldn't have gotten a better upgrade. The gun feels pretty solid, no creaks, or squels in the plastic that I have noticed; the only gripe I have about the body is that there is a visible seam down the center of the gun on the top, which aesthetically is pretty poor but none the less it's no big deal - I don't think the gun will fall apart on you. The internals are also pretty decent, everything inside is full metal, and they didn't really skimp out on internals too much. Notice the "too much" the one main thing they did skimp out on was the motor, it is a pretty terrible motor to be honest. With a 9.6v Ni-Mh I was getting about 11RPS. Other than that the internals are pretty good and don't need an upgrade. Oh! One of the best things that comes with this gun is the barrel, you have a 385MM tight bore 6.03 stock barrel - in my tests I've hit targets up to about 125ft but after that the bb's kind of drift off. This barrel is perfect, no upgrades needed as far as CQB goes - the only thing it needs is a definite cleaning as when I got the gun the barrel was filthy and bb's kept jamming. One of the biggest problems I've honestly had with the gun so far is probably the removal of the orange tip. Online I looked at videos and watched and watched, even the evike video reviews on this gun and the stock flash hider that they all had was a black metal flash hider with a small orange ring ( 1/4 inch ) at the end. My gun came with a flaming orange cheap plastic tip that was glued on with more glue than I've ever seen. It required me to get the tip to over 150 degrees for the thing to actually move. After about an hour or so I finally got it off with some pliers and a wrench. Luckily APS gives the full metal black flash hider with the gun ( so atleast they expect you to remove the orange ) Overall this gun is great, the accuracy is decent for what I needed ( CQB 75-100ft MAX ), the price is pretty good ( better when it's on sale ), and the gun is decently upgraded and can be used stock and preform well.
Oh yeah! The gun comes with two springs, an equivalent M100 Spring, and an M120 Spring. The M100 shoots pretty hot for CQB when I chronoed it, about 360 was the average give or take a few. The M120 consistently hit 409-411. So if you're using this gun for CQB I would reccomend buying an M90 spring or even an M80 just to be safe. Read More Reviews Write a Review
« Back to product description
APS Full Size Urban Assault Rifle Airsoft AEG w/ Metal Gear Box
The new V.2 UAR now features rear wiring and a thicker and larger removable butt plate to extend the battery storage compartment allowing use of a wider range of batteries.
Another improvement made to the V.2 UAR is a modified magazine well to extend magazine compatibility to a greater number of high cap and mid cap magazines.
Finally the gearbox has been improved upon for more consistent feeding and cycling during rapid fire thanks to the newly revised air nozzle.
Features: Three Magazine Release button
Unlike the traditional SMG, the UAR has three magazine release buttons. Two buttons are located at the front part of the gun parallel to each other and the other button located next to the magazine housing at the back. Three magazine release buttons allow users to release the magazine in different tactical situation.
Mirror design for both left and right handed users
Magazine Release button is located on both the left and right sides of the gun. The cocking handle has quick detach function allowing users to place the handle on either left or right. Users can operate this gun easily no matter if they are left handed or right handed.
Adjustable Hop Up and functional bolt release catch
Similar to APS ASR Series, the bolt can be locked backward which allows the user to adjust the Hop Up easily. After adjustment, users can simply press down the bolt release button located on the top of the butt stock to release the bolt back to its original position.
The UAR standard comes with 4 side rails. The top and side rails allows players to add lights, scopes, red dots and much more
The UAR comes equipped with a dynamic trigger, ergonomic pistol grip with room to place two 123A batteries. A modified magazine housing allows a user to perform fast reloads without any trouble. The design of the bigger trigger guard is also extremely helpful when a player is wearing gloves.
The UAR uses APS V3 Hybrid gearbox. With its bullpup design, the UAR is a medium size CQC airsoft gun with a long 385mm inner barrel.
Easy Assembling and dissembling
One of the greatest features of the UAR is it's special design where no tools are required when assembling and dissembling. A user can simply disassemble the gun by removing 3 main pins on the lower receiver. The unused main pin can be inserted on the top rail. A Stick type battery is placed in the front part of the gun. No tools are required and users can reassemble the UAR in less than 60 seconds.
Hop Up Chamber
For the internals APS has equipped the UAR with a genuine hop up chamber, which is rarely found in other AEGs. The standard velocity of the UAR is 350 FPS which is easily upgradable by changing the main spring. The main spring can easily be changed with the UAR's quick detach feature found on the hybrid gearbox
190rd Hi-Capacity. Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG Magazines
~350 FPS (Measured with 0.20g BBs)
Ver 3 QD Spring Full Metal, Fully Upgradeable
Gun, 2x Magazines, Extra AEG Spring, Manual
8.4v Small Type / 7.4v mini lipo recommended (Battery not included)
This product was added to our catalog on Friday 25 January, 2013.