G&P M4CQB WOC "Special Forces 100M" GBB Airsoft Gas Blowback Rifle Challenge Kit (9.5" Barrel)

$230.00 $184.00

This item is currently Discontinued

Model: Kit-GP-WOK001-WP71-S
x

3 Customer Reviews

by Stephen K. on 07/19/2014
"Externally, this gun is beautiful. Most of the parts are solid except for the handguard. It feels like a strong plastic but it wobbles even when the delta ring is full tightened. The only other external problem I had was the charging handle latch breaking. Keep in mind that the receiver is very nice, but also easily scratchable. Not a huge deal for me since I like a "used" look on a gun but for others it may be different. The magazines that you get separately are solid, and have a snug fit in the gun. DO NOT BUY KING ARMS MAGAZINES. They are advertised as working in G&P guns but they are terrible in almost every way. Just a warning for people who may be buying this. Now, the internals are where this gun falls short. I'm not sure what they are made of, but G&P got lazy with them. After putting not even 100 bbs through this thing I had 4 parts break inside the gun. Terrible internals...if you're want this gun to be skirmishable you need to get some steel parts rather than whatever these things are made of. Hope I helped someone out with this.
by Andrew R. on 11/17/2013
"This is a great kit. I spent about 2 1/2 hrs in total assembling it, and I am still testing it for durability and reliability. It would be nice if the standard G&P were available, I am sure I would have had less teething problems than I had with the KA magazines. Some upgrades and issues I have experienced.
1) it seems not all the parts were packed for the hammer bushings as I seem to have a few short. This was not a problem, as I just manufactured some new ones.
2) the BB loading finger on the nozzle got deformed, mainly due to issues with the KA magazine. I had to cut it off and manfuacture a new finger from steel, which was then pinned into place and works perfectly.
3) the nozzle retaining clip broke after a few shots, but it doesn't seem to detract from the performance of the gun.
4) the charging handle spring catch broke. This I can manufacture a rreplacement of once again so there's no major issue.
Other than these small issues (it DOES say, "challenge kit") the gun is awesome. 600 rounds per minute at about 400FPs on 0.25 BBs. The internals operate very well, and you just need to keep it clean and free of erant BBs and pieces of broken ones if they break during feeding. Accuracy is very good too, at 30 ft on full auto a 4 inch grouping is possible on a full magazine. The recoil is very lively and adds very much to the realism.
All in all excellent value if you like assembling this type of thing, are mechanically inclined and don't mind troubleshooting, modifying and upgrading this gun to exactly what you want.
by Kirk C. on 01/26/2013
"I spent about 2 hours to finish the lower receiver, it wasn't that hard to build, but I google & youtube a lot and see how others finished theirs.
I was using wooden BBQ sticks (cut in the right length equal to the metal pins),hold the springs, and push and slide the metal pins in. The auto switch was a pain, I spent almost 30min to struggle the thing in.
The silicone gel is a must for some parts, especially for the trigger guard & a small hammer will do the job without breaking part of the lower.
It wasn't a bad experience, since I replaced all the springs with 120% reinforced parts, the pushing and pulling really hurt my fingers. Other than that, building one of these guns are not rocket science, just need a few breaks in between, thinking and rethinking, and make sense and what not.
All I have to say its was really educational, and I probably will buy few more of these kits in the future.
*G&P Challenge kit does not come assembled and does not include a magazine

G&P M4CQB WOC "Special Forces 100M" GBB Airsoft Gas Blowback Rifle Challenge Kit (9.5" Barrel)

This is the ultimate in DIY Challenge Kits from G&P. This Evike.com Exclusive kit comes with everything you need besides the magazine to make a fully functional G&P M4 WOC Full Metal GBB. Your opportunity to own a high quality G&P GBB M4 at a fraction of the normal price.

Update: This G&P M4CQB WOC Kit comes with the newly designed nozzle more efficient system as you will see. The manual still shows the old type nozzle but the kit will come with the new type!

What comes with this kit?
The G&P M4CQB Challenge Kit comes with all of the internal parts necessary including the Blowback System parts, Hopup System Parts, Barrel Assembly Parts, Receiver, Foregrip, Front and Rear Sights, Buffer Tube and Stock System.

Will I need to assemble anything?
The G&P Challenge kit is meant as a Do-It-Yourself kit for highly experienced players and comes completely disassembled. You will need a solid grasp on the inner and outer parts of Western Arms style M4 GBB's to be able to complete this kit.
Evike.com will not be responsible for any mishandling, damage, or other issues caused by the purchaser's inexperience or lack of knowledge on building this kit.

Compatibility: The G&P M4CQB GBB Challenge Kit is Western Arms compatible and can be used with Western Arms upgrade parts. Keep in mind, like any aftermarket parts, some modification may be required.

Does it come with a Magazine?
No, the G&P M4 GBB Challenge kit does not include a magazine. Thus G&P is able to export this item to you at great cost without it being "a complete gun" while saving you assembling cost at the same time for those that know their M4 GBB.

**To comply with US Federal Regulations, all kits will come with a blaze orange muzzle device permanently affixed to the outer barrel.

G&P magazines available here at Evike.com


Disclaimer: The supplied manual includes instructions on installation of the outdated Nozzle design. The updated Nozzle has been illustrated below.

















This product was added to our catalog on Wednesday 12 September, 2012.

This item is Discontinued.

Wanna chat about G&P M4CQB WOC "Special Forces 100M" GBB Airsoft Gas Blowback Rifle Challenge Kit (9.5" Barrel)?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.