"This gun is great, after you replace the o-ring and get a better recoil spring
I give it 2 stars stock "I got this gun around September and have absolutely loved it!!! I've used it in multiple milsim matches and have just ripped through the other players!
Heavy duty metal
Massive power from green gas/propane
can add mock silencers and laser/lights
nice feel when shooting
Can change the grip if you buy another 1911 grip
gives your enemy's a nice bruise ;)
The safety pin fell off of mine but i think it was because my holster is a USP one
if you don't fill the mag properly then you wont get more than 3-5 shots out of the gas
the paint scratches very easily, but just don't drop it on concrete
would be better with maybe a black or OD Green paint job
other than that nothing!!! "Real Steel Comparison: Kimber Pro CDP II 4" and WE DW 4.3
Kimber (fully loaded, no rail): 2lbs 4oz
WE DW (fully loaded, with rail): 2lbs 4oz
*Numbers rounded to the nearest .5 ounce on a postage scale*
*Lightweight laser grips installed on both*
Almost exact copy of a Kimber
Nice kick, FPS
So far no misfires or magleaks
Front sight tan and not removable (just paint it)
There's lots of great reviews already for the DW so I won't go into FPS or accuracy again, but it's GREAT for a barrel of this length. So far, no mag leaks either. Just a real steel comparison:
I'm even more impressed than I expected with this. Next to a real steel Kimber, the WE Desert Warrior looks exactly identical in shape/size. So close that it makes me think the mold for the DW was made from an actual 4" Kimber. Surprisingly, they also weigh almost exactly the same.
It's a pretty solid GBB overall...once you fix the wobbly rail by removing it and putting a piece of card stock between it and the gun. The slightly wobbly slide is not so bad because that means a lot more tolerance for dust/dirt and less prone to jams or malfunctions. You don't need tight slides to shoot plastic BB's accurately, and many will argue the same for real bullets. (But not Kimber - extremely tight tolerances on the real steel)
The paint does scratch easily, but a light coat of silicon oil helps. Same as gun oil on real steel. Also, if the slide scratches, I have an excuse to paint it black and make a custom two-tone...
If you think this is heavy, it's because it's the same weight as the real gun loaded with full clip of .45 ACP! This says tons about the great feel of the DW in your hand - its just like holding a real steel Kimber, and this is actually very light for a 1911. Kimbers are built to keep the weight down, complete with aluminum frames and slides. Something to keep in mind while carrying this. It's great for training if you plan on owning a Kimber or already do, and ammo is a lot cheaper.
Most real steel 1911 grips fit, along with any made for the TM 1911's!
Full-size and 4.3 use the same sized grips. The standard hardwood grips from the Kimber fit, with some effort, but the main thing is that they fit without modification. This opens up a world of options, not to mention custom stuff. I also managed to fit the airsoft Hurricane Laser Grips, but had to add pieces of card stock (cigarette box) and duct tape as shims around the inside of the pressure switch. Otherwise, the pressure switch stayed activated. But after that, it works perfectly every time.
This is so close of a replica, I'm pretty sure other real steel parts would fit too, like the Wilson Combat mag-wells. I havent seen any airsoft single-stack mag-wells, but the real steel is only about $35. I haven't tried it, but it hooks over the bottom grip screw, which is in the same place on the real steel. Of course, never put airsoft parts on real steel, but the other way around is usually fine for external parts..
So for any Kimber owners, or non-Kimber owners, who want a nice Kimber replica to mess with, this is it. Oh yea, and it outperforms any GBB of this size that I've ever owned since like, the '90's when metal slides were hard to get. I can't actually say I've owned many, though...but I assume it does fine at stuff like CQB or backup for a sniper. You just can't miss with this gun, for the price. And if you own a Kimber, or want one, just buy this too already. You won't be disappointed! Read More Reviews Write a Review
« Back to product description
(Stock) Add 110mm Mock Silencer (+$25.00) Add M3 Tac Light (+$45.00) Add M3 Tac Light & 110mm Mock Silencer (+$70.00) WE Full Metal Desert Warrior Socom 4.3 FDE Airsoft Gas Blowback Pistol (Tan)
This is the WE Tech Version of the Marui Desert Warrior, with high flow internals, full metal slide and frame, and hard kick. Given the 100% parts support from WE and Evike.com, the Tokyo Marui Desert Warrior just cannot compare.
The Desert Warrior 4.3 is truly a pistol that is built to impress. The performance, look, and feel are top of the line in the Airsoft industry. The WE Desert Combat 4.3 is heavy weight and constructed with great reliability in mind. It is able to take green gas, red gas, and propane. Lots of upgrade and spare parts are available so it will virtually never go out of service on you.
Features: High Flow Internals Textured desert tan grip panels pre-installed. On frame magazine release and ambidextrous thumb safety with beaver tail. Built-in Professional shooter's front and rear sights. Full Metal frame and slide with forward and rear cocking serration. Railed Frame Design for tactical light or laser aiming device. Light pull 3-hole trigger. Built in lanyard hook. Metal reinforced outer barrel, chamber, recoil spring guide rod, on frame
safety, slide stop, hammer and trigger. Realistic Weight and Blowback Action. Muzzle Velocity:
300~330 FPS (Measured with 0.20g BBs)
210mm x 135mm
Green Gas, Red Gas, Propane (Magazine requires extension with most green gas containers)
Gun, Magazine and Manual.
Mock suppressor is for appearances/display only, it is not intended to be used when firing the gun and does not offer any sound suppression capabilities.
This product was added to our catalog on Tuesday 23 February, 2010.
This item is currently
Out of Stock. Most out of stock items are restocked within 1-3 weeks. Some items may take longer. Please add this item to your wishlist to keep posted on its availability. Wanna chat about
WE Full Metal Desert Warrior Socom 4.3 FDE Airsoft Gas Blowback Pistol (Tan)?
Have questions about this item? We monitor these comments daily, but it may be faster to
email us directly or call us at 1-626-286-0360.