ID: 42087 (AEG-GP-CAEG017)
Hover or touch above to zoom
Sorry, this item is Discontinued
MAP ProtectedExempt From Coupons
No Payments + No Interest if paid in full in 6 months through PayPal Credit. Simply check out using PayPal and select PayPal Credit!
G&P Colt Licensed Full Metal XM177E2 Airsoft AEG RifleFeatures:Stamped Colt TrademarksFull Metal Receiver and Barrel AssemblyXM177E2 Type Handguard, Pistol Grip, and StockRetractable Stock DesignFull Metal, Fully Upgradeable GearboxRealistic Fixed Carry HandleLength:
130rd Mid-Capacity. Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
350~370 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
Semi/Full-Auto, SafetyPackage Includes:
7.4v Small Stick Type Lipo recommended (Wired to Stock Tube with Mini Deans Connector. Battery not included)Hopup:
Established in 1995, G&P is among the oldest Military-simulation and training Airsoft manufacturers in the world. Started as a top combat light provider for law enforcement and military agencies around the world, G&P branched into Airsoft manufacturing with the same belief to never sacrifice quality for lower price. Their motto is visible on every G&P product. Every G&P AEG rifle is hand assembled and individually fine-tuned by top technicians in the industry to match G&P's unparalleled quality and reputation. G&P utilizes CNC precision machining and real-steel finish/coating processes on many of their products.
FPS Range: 350-370
(Write a review)
"This is a very solid gun. Well worth $250, I much prefer it over my KWA SR10. BUT, as with all G&P's, the hopup was put together by an infant. I had to put an o-ring straight out of the box on mine because the hop-up adjustment wheel screw was too long and when you adjusted the hop-up, it went right back to the previous setting. Works like a charm now. Be aware, also as with all G&P's, the dust cover does not close. You would think with all the time they put into the great gearbox and great externals they could figure out how to put a hop-up together and make a functioning dust cover. Needs to be rewired out of the box, mini-DEANS is worthless for airsoft, no idea why it would be wired to it. Great gun if you know how to do minor things or are willing to turn it over to a shop for a couple of minutes.
Streamlined, unlike the 20 pound rifles with every attachment you can get on them everyone uses.
Accurate and consistent once you fix the hop up
366 FPS with .25g
Hop-up comes malfunctioning
Hop-up nub is just a piece of wire insulation cut. Badly.
Comes wired to mini-DEANS which is worthless at airsoft voltage
Need a special adapter or special(mostly discontinued)optics
Motor grip gets extremely hot
"I purchased this rifle around the beginning of 2013 and have had it for well over a year now. Like your standard G&P, this is quite the quality rifle.
It has full real steel trades, however the serial number is not unique. You can tell whether you have an older XM177E2 by whether the "Made in Hong Kong" trades are present or not on the upper receiver's left side. I do not have these trades but your mileage will vary.
Externally the rifle is solid, however I have had the problem of the LE stock slipping off on occasion when I try to move to the position farthest from the lower receiver on the buffer tube.
The buffer tube has three positions and neither the buffer tube nor the LE stock are compatible with G&G stocks/tubes per first hand experience. Such is the price of buying a replica with more realistic features.
I have been doing tech work for the past 4 years and have found the gearbox to be pretty solid. Somewhat pre-shimmed. I have been using it with a buffer tube 7.4 LiPo.
I initially found the FPS to be 398-410 with .2s and 354-361 with .25s, however they may have changed the springs between replica batches.
The trigger pull is crisp for a vanilla AEG and the RPS is respectable. Unfortunately I do not have solid numbers and will not ballpark it as to not give inaccurate information.
The inner barrel is 300mm long, not particularly long but not too bad. Like all G&Ps however, the hop up unit needed a little work. A little bit of shimming, a new bucking/nub combo, and some DIY compression mods made this rifle sing.
This rifle will fit a V2 Gen. 2 Polarstar unit without any problems what-so-ever. I do not know about Gen. 1s but Gen. 3s will be fine as well.
The dust cover will not close all the way unless the gearbox is removed. Not something I am personally fond of.
If you want to remove the flash hider and manage to get the metal one with orange halfway along the tip, you can take a 5/8 size wrench and twist to the left/counter-clockwise to remove it.
On one last note, the hand guards are thinner than that of regular M4s. Any forward wired gearboxes will have trouble find battery space. As G&P is a realistic oriented manufacturer, many aftermarket hand guards may not work. I have found this to be the case with the Avengers M4-S1 handguard, which will not fit unless you are willing to dremel/bruteforce it.
Overall you get a solid rifle that is historically accurate to some Vietnam units and works well. I would recommend it as it had performed very well.
Discuss about z G&P Colt Licensed Full Metal XM177E2 High Performance Airsoft AEG Rifle with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
This item is Discontinued.